SCREEN E1 FOR LOGIS MINI
Omni-directional access points are often inadequate for the antenna. A Wi-Fi network design expert will select an antenna that will provide adequate coverage in a specific area and take into account the installation site. The antenna propagation patterns are important considering the amount of reflective material in stock.
код продукта:
E1
Antenna type:
Частота (мин):
2 400MHz
Частота (макс):
6 000MHz
Усиление:
8dBi
11dBi
Gain (max):
11dBi
КСВ (макс.):
2.00:1
Half Power Beam Width (-3dB) - horizontal:
40°
15°
Half Power Beam Width (-3dB) - vertical:
76°
16°
Front/Back Ratio:
>30dB
Polarization:
Impedance:
50Ω
Max Composite Power:
2W
Сокращенный для DC:
no
Mounting Diameter:
ø 38…51mm
Weight (incl. mount):
0.38kg
Dimensions (excl. mount):
190x204x90
Размещение:
Outdoor
Indoor
Windload:
130km/h
VSWR data:
RPE data:
New product:
New
Key benefits:
RPA data:
Frequency band:
2400 - 2500
4800 - 6000
СЕРИЯ:
INDUSTRY
Instalation foto:
Instalation tips:
Fine adjustment of the antenna ensures the correct propagation of radio signals. Proper installation of the mast, antenna and cable provide a stable and proper operation of the antenna installation.Horizon series antennas can be mounted under the ceiling (vice versa) with the cable or jack upside down
- Level mast or boom using a bubble leveler.
- Assemble the antenna mount as on drawing.
- Level mast or boom using a bubble leveler.
- Assemble the antenna mount as on drawing.
- Mount antenna on the mast.
- Level the mast or boom, check antenna vertical position.
- Vent holes should be located at the bottom of the antenna.
- Screw the antenna to the mast, leaving slack in the adjustment of direction and inclination.
- Determine the direction and inclination.
- Finally tighten the mounting screws.
- Connect cable and insulate antenna connector.
- Fasten cable to the mast or boom.
- It is worth to note achieved link parameters.
Температура:
-40°C
80°C
Цвет:
silver
warranty:
