Product code: 
IS-G1313-F2425-HV-M
SECTOR MIMO HV 2.4GHz

A new sector antenna for base stations in MIMO technology developed for use with radio equipment operating in the 802.11n standard, which uses MIMO technology. The antenna has two connectors, they are relatively light and compact, which saves space on the mast. The antenna can be used in high storage warehouses.

electrical

Frequency (min)
2 400MHz
Frequency (max)
2 500MHz
Gain
  1. 13dBi
  2. 13dBi
VSWR (max)
1.50:1
Polarization
Horizontal and Vertical
Half Power Beam Width (-3dB) - horizontal
  1. 60°
Half Power Beam Width (-3dB) - vertical
  1. 60°
FBR (Front/Back Ratio)
>25dB
XPD (Cross Polarization Discrimination)
>20dB
Port to Port Isolation:
>37dB
Max Composite Power
2W
DC Ground
yes
Impedance
50Ω

mechanical

Connector
N female
Mounting Diameter
ø 38…51mm
Dimensions (excl. mount)
340x194x25mm
Weight (incl. mount)
0.84kg

enviromental

Enviroment
Outdoor
Windload
190km/h
IP Rating
IP64
Temperature
-40°C ... 80°C

compliance

Instalation tips: 

Fine adjustment of the antenna ensures correct propagation of radio signals. Proper installation of the mast, antenna and cable ensures stable and correct operation of the antenna installation.

  • Align the mast or boom using a spirit level.
  • Assemble the antenna holder as shown.
  • The vents should be at the bottom of the antenna.
  • Screw the antenna to the mast leaving some slack in the direction and tilt adjustments.
  • Specify the direction and slope.
  • Finally, tighten the fixing screws.
  • Connect the cable and insulate the antenna connector.
  • Attach the cable to the mast or boom.
  • It is worth noting the achieved link parameters.
10/09/2020 - 07:07