Product code: 
IP-G0812-F2457-M2
PANEL 8 DUAL-BAND 2x2

 

 

**Advanced 2x2 MIMO Wi-Fi Panel Antenna – Sophisticated Technology for Demanding Environments**

 

electrical

Frequency band(s)
  1. 2400-5725
Frequency (min)
2 400MHz
Frequency (max)
5 750MHz
Gain
  1. 8dBi
  2. 12dBi
VSWR (max)
2.00:1
Polarization
Horizontal and Vertical
Half Power Beam Width (-3dB) - horizontal
  1. 40°
  2. 36°
Half Power Beam Width (-3dB) - vertical
  1. 40°
  2. 25°
FBR (Front/Back Ratio)
>20dB
XPD (Cross Polarization Discrimination)
>20dB
Port to Port Isolation:
>40dB
Max Composite Power
2W
DC Ground
no
Impedance
50Ω

mechanical

Connector
any type
Cable
BELDEN 7508R / 90cm
Mounting Diameter
ø 38…51mm
Dimensions (excl. mount)
200x196x40
Weight (incl. mount)
0.64kg

enviromental

Enviroment
Outdoor, Indoor
Windload
160km/h
IP Rating
IP67
Temperature
80°C ... -40°C

compliance

Instalation tips: 

Fine adjustment of the antenna ensures the correct propagation of radio signals. Proper installation of the mast, antenna and cable provide a stable and proper operation of the antenna installation.Horizon series antennas can be mounted under the ceiling (vice versa) with the cable or jack upside down

  • Level mast or boom using a bubble leveler.
  • Assemble the antenna mount as on drawing.
  • Level mast or boom using a bubble leveler.
  • Assemble the antenna mount as on drawing.
  • Mount antenna on the mast.
  • Level the mast or boom, check antenna vertical position.
  • Vent holes should be located at the bottom of the antenna.
  • Screw the antenna to the mast, leaving slack in the adjustment of direction and inclination.
  • Determine the direction and inclination.
  • Finally tighten the mounting screws.
  • Connect cable and insulate antenna connector.
  • Fasten cable to the mast or boom.
  • It is worth to note achieved link parameters.





  
  




  
      
  
  01/14/2025 - 12:14