Horizontal and Vertical

HORN Wi-Fi 6E

Radiator for dish antennas or standalone 2x2 MIMO antenna, after attaching the holder. Compatible with the latest Wi-Fi standard 6E (extended), 1024 QAM, dual-polarized. The precise shape of the die-cast aluminum takes full advantage of the antenna aperture, and the excellent electrical parameters ensure high gain on the parabolic antenna: 29 dBi for a 60 cm dish, 32 dBi for a 90 cm dish and 35 dBi for a 120 cm dish. When using 2x2 MIMO AC or 802.11ax devices.

Product code: 
HORN-G13-F5364-M
Antenna type: 
directional
Frequency class: 
5GHz
6GHz - (WiFI 6E)
Frequency (min): 
5 300MHz
Frequency (max): 
6 500MHz
Gain: 
13dBi
Gain (max): 
13dBi
VSWR (max): 
2.00:1
Half Power Beam Width (-3dB) - horizontal: 
38°
Half Power Beam Width (-3dB) - vertical: 
30°
Front/Back Ratio: 
>40dB
Cross Polarization Discrimination: 
>20dB
Port to Port Isolation: 
>20dB
Polarization: 
Horizontal and Vertical
Impedance: 
50Ω
Max Composite Power: 
200W
DC Ground: 
no
Connector: 
N female
Mounting Diameter: 
ø 40mm
Weight (incl. mount): 
0.24kg
Dimensions (excl. mount): 
136x86x86mm
Enviroment: 
Outdoor
Windload: 
130km/h
VSWR data: 
File osw_5.3_7ghz_gn_unicon_vswr.csv
GAIN data: 
File sam_osw_gain_5.3-6.5ghz.csv
RPE data: 
File rp-h-feeder_5500-5800.csv
CE - ROHS2 - RP 5GHz: 
PDF icon ce-ec_rohs2_pl_en.pdf
New product: 
IP Rating: 
IP64
Key benefits: 
Solid casing
RPA data: 
File rp-v-feeder_5500-6000_20000103-212624.csv
SERIES: 
PROFESSIONAL
Instalation foto: 
Instalation tips: 

Fine adjustment of the antenna ensures the correct propagation of radio signals. Proper installation of the mast, antenna and cable provide a stable and proper operation of the antenna installation.

  • Level mast or boom using a bubble leveler.
  • Assemble the antenna mount as on drawing.
  • Level mast or boom using a bubble leveler.
  • Assemble the antenna mount as on drawing.
  • Mount antenna on the mast.
  • Level the mast or boom, check antenna vertical position.
  • Vent holes should be located at the bottom of the antenna.
  • Screw the antenna to the mast, leaving slack in the adjustment of direction and inclination.
  • Determine the direction and inclination.
  • Finally tighten the mounting screws.
  • Connect cable and insulate antenna connector.
  • Fasten cable to the mast or boom.
  • It is worth to note achieved link parameters.
EAN: 
590775804019
Bar Code: 
5JKRHFS*aeabjf+
Temperature: 
-40°C
80°C
Colour: 
grey
warranty: 

Pages

Subscribe to RSS - Horizontal and Vertical