Two-Way RF Power Divider - N-Type - Splitter/Combiner function - 2x,3x,4x N Female output Connect two or more devices to the one antenna or vice versa simultaneously by splitting the antenna signal.This is a high quality low VSWR, low insertion loss RF power divider.When in weak signal strength areas it's important to use a high quality splitter to ensure efficiency losses are kept to a minimum, minimal electrical noise, and output isolation maximised.Poorly designed dividers can result in a signal power reduction far greater than 3dB, and signal code power reduced by significantly more.Splitter The input signal is equally split into two output signals, each reduced by 3dB, 4,5dB, 6dB due to the 1:2, 1:3, 1:4 power division.A small signal loss of 0.3dB is incurred as no RF device can operate at 100% efficiency. When determining whether you can afford to split your signal you must consider that the signal will be halved between each device - is your signal strong enough? In very low signal areas it's often advisable to use two antennas instead of a splitter. Combiner While it is possible to sum two input signals with no loss, this can only be accomplished if the input signals are identical in phase and amplitude. When two signals are completely out of phase (180 degrees) the signals will cancel completely, hence the statistical average for two unknown signals is a 3dB combination loss (ie reduced by half). Utilising microstrip structure technology, this splitter has exceptional in-band flatness, high isolation, very low insertion loss, excellent standing wave performance and is easy to install. Designed for cellular mobile communications,GSM,LTE, RFID, Lora, Sigfox, Xbee and spread spectrum communications.
|Frequency Band (MHz)||698-2700|
|Split Loss (dB)||3.0||4.8||6.0|
|Insertion Loss (dB)||≤ 0.3||≤ 0.4||≤ 4.0|
|Isolation (dB)||≥ 23||≥ 23||≥ 20|
|VSWR||≤ 1.25||≤ 1.25||≤ 1.25|
|Average Power (W)||50|
|Working Temperature (deg)||-35° ≈+65°|