Product code: 
IH-G0405-F2460-V-M
HORIZON 4X4 MIMO DUAL-BAND MINI

  The antenna is specially designed to work in such conditions.This antenna is designed for installation in WAVE2 and the MU-MIMO multiplexing time-space technologies. The antenna operates in two frequency bands 2.4 and 5 GHz, offering excellent utilization of the radio spectrum. Specially designed arrays of radiators with low self capacitance guarantee correct operation with a high degree of encoding - 256 QAM, which is used in such systems.

electrical

Frequency band(s)
  1. 2400 - 2500
  2. 4800 - 6000
Frequency (min)
2 400MHz
Frequency (max)
6 000MHz
Gain
  1. 4dBi
  2. 5dBi
VSWR (max)
1.70:1
Polarization
Vertical
Half Power Beam Width (-3dB) - horizontal
  1. 360°
Half Power Beam Width (-3dB) - vertical
  1. 35°
XPD (Cross Polarization Discrimination)
>18dB
Port to Port Isolation:
>20dB
Max Composite Power
2W
DC Ground
no
Impedance
50Ω

mechanical

Connector
N female
Mounting Diameter
ø 38…51mm
Dimensions (excl. mount)
300x80
Weight (incl. mount)
1.10kg

enviromental

Enviroment
Outdoor
Windload
190km/h
IP Rating
IP64
Temperature
-40°C ... 80°C

compliance

ETSI EN 302 326-3 (CE)
compliant
2002/95/EC (RoHS)
compliant
2002/96/EC (WEEE)
compliant
Instalation tips: 

Fine adjustment of the antenna ensures the correct propagation of radio signals. Proper installation of the mast, antenna and cable provide a stable and proper operation of the antenna installation.Horizon series antennas can be mounted under the ceiling (vice versa) with the cable or jack upside down

  • Level mast or boom using a bubble leveler.
  • Assemble the antenna mount as on drawing.
  • Level mast or boom using a bubble leveler.
  • Assemble the antenna mount as on drawing.
  • Mount antenna on the mast.
  • Level the mast or boom, check antenna vertical position.
  • Vent holes should be located at the bottom of the antenna.
  • Screw the antenna to the mast, leaving slack in the adjustment of direction and inclination.
  • Determine the direction and inclination.
  • Finally tighten the mounting screws.
  • Connect cable and insulate antenna connector.
  • Fasten cable to the mast or boom.
  • It is worth to note achieved link parameters.
06/19/2017 - 15:30